top of page
PE Pipe Extruder - Main Image

PE Pipe Extruder

0,00 US$Preço

Product Overview

This machine is used to extrude PE, polyolefins and other thermoplastics.

It can handle all kinds of plastic products and related auxiliary machinery.

Such as film, tube, rod, plate, wire, tape, cable insulation, hollow products and so on. It is also used for granulation.

PE solid wall pipe

The PE material mainly used in the manufacture of pipes, plates, rods and other plastic products is equipped with different types of machines and downstream.

Technical Specifications

Pipe diameter(mm)

16-63 | 20-110 | 75-160 | 90-250 | 110-315 | 160-450 | 315-630 | 500-800

Extruder

SJ45 | SJ60 | SJ75 | SJ75 | SJ90 | SJ90 | SJ120 | SJ150

Motor power(KW)

AC30 | DC75 | DC110 | DC110 | DC160 | DC160 | DC280 | DC335

output(KG)

60-100 | 100-150 | 250-300 | 250-300 | 350-400 | 350-400 | 650-700 | 850-900

Maximum line speed(m/min)

10 | 6 | 6 | 6 | 3 | 1.2 | 0.9 | 1.7

Models & Capacity

  • Pipe diameter(mm): 16-63; Extruder: SJ45; Motor power(KW): AC30; output(KG): 60-100; Maximum line speed(m/min): 10

  • Pipe diameter(mm): 20-110; Extruder: SJ60; Motor power(KW): DC75; output(KG): 100-150; Maximum line speed(m/min): 6

  • Pipe diameter(mm): 75-160; Extruder: SJ75; Motor power(KW): DC110; output(KG): 250-300; Maximum line speed(m/min): 6

  • Pipe diameter(mm): 90-250; Extruder: SJ75; Motor power(KW): DC110; output(KG): 250-300; Maximum line speed(m/min): 6

  • Pipe diameter(mm): 110-315; Extruder: SJ90; Motor power(KW): DC160; output(KG): 350-400; Maximum line speed(m/min): 3

  • Pipe diameter(mm): 160-450; Extruder: SJ90; Motor power(KW): DC160; output(KG): 350-400; Maximum line speed(m/min): 1.2

  • Pipe diameter(mm): 315-630; Extruder: SJ120; Motor power(KW): DC280; output(KG): 650-700; Maximum line speed(m/min): 0.9

  • Pipe diameter(mm): 500-800; Extruder: SJ150; Motor power(KW): DC335; output(KG): 850-900; Maximum line speed(m/min): 1.7

Motor & Screw Specifications

  • The screw diameter of SJ series screw extruder is 20~200mm, and the aspect ratio is 10-40. You can choose the type, specification and capacity of the extruder based on your product.

Advantages & Features

  • Machine design is advanced. Its production capacity is high. Good plasticization and low energy consumption. It adopts hard tooth surface gear transmission, low noise, stable operation, large bearing capacity, long service life and so on.

  • The feeding system uses an electric servo drive, and the main shaft uses an industrial precision bearing.

    bottom of page