top of page
Rubber Open Mill - Main Image

Rubber Open Mill

0,00 $USPrix

Product Overview

The rubber mixing mill is also called two roll open mill, rubber mixer,open mixing mill machine, two roll mill and etc.It is widely used for rubber compound mixing or rubber sheeting.

Structure description

Technical Specifications

ITEM MODEL

Rubber Open Mill | XK-160 | XK-250 | XK-360 | XK-400 | XK-450 | XK-550 | XK-560 | XK-610 | XK-660 | XK-710

Rubber Sheeting Mill

-- | -- | -- | XKY-400 | XKY-450 | XKY-550 | -- | XKY-610 | XKY-660 | XKY-710

ROLL DIAMETER

mm | 160 | 250 | 360 | 400 | 450 | 550 | 560-510 | 610 | 660 | 710

POLL WORKING LENGTH

320 | 620 | 900 | 1000 | 1200 | 1530 | 1530 | 1930 | 2130 | 2200

FRONT ROLL LINEAR SPEED

M/min | 9 | 16.3 | 16.7 | 18.65 | 21.8 | 28 | 26.4 | 30.5 | 28 | 31.9

FRONT ROLL LINEAR SPEED

M/min | -- | -- | -- | 21.9 | 25.6 | 31 | -- | 30 | 31.630.5 | 30.26

SPEED RATIO OF ROLLS

Rubber Open Mill | 1:1.35 | 1:1.1 | 1:1.25 | 1:1.27 | 1:1.27 | 1:1.2 | 1:1.2 | 1:1.1 | 1:1.24 | 1:1.51

Rubber Sheeting Mill

-- | -- | -- | 1:1.08 | 1:1.08 | 1:1.09 | -- | 1:1.09 | 1:1.091:1.13 | 1:1.09

MAX POLL SPACE

mm | 4.5 | 8 | 10 | 10 | 12 | 16 | 15 | 15 | 15 | 15

COMPOUND FEEDING CAPACITY

kg | 1-2 | 10-15 | 20-25 | 18-35 | 50 | 50-65 | 50-65 | 140 | 165 | 190

MOTOR POWER

kw | 5.5 | 18.5 | 30 | 45 | 55 | 110 | 90 | 160 | 185/250 | 280

DIMENSIONS(L×W×H)

L | mm | 1133 | 3200 | 4200 | 4471 | 5005 | 6300 | 6050 | 6575 | 6700 | 8185

W

mm | 920 | 1115 | 1780 | 1850 | 1790 | 2230 | 2282 | 2910 | 3400 | 3910

H

mm | 1394 | 1345 | 1760 | 1760 | 1830 | 1900 | 1900 | 2000 | 2100 | 2270

GROSS WEIGHT

t | ~2 | ~3.2 | ~6.5 | ~8.3 | ~11.4 | ~22 | ~22.5 | ~44 | ~49 | ~59

Machine Components

  • 1 Base frame is welded and annealed.

  • 2 The motor is 3- phase asynchronous motor, protection levels:IP54.

  • 3 The driving type:Single out- shaft or double out- shaft. The speed reducer is hard gear reducer,which has long service life and low noise.

  • 4 The front and back roller is borded type or drilled type. It is made of chilled alloy cast, the surface hardness is HS70±2

  • 5The roller bearing is rolling bearing with Low noise, save power almost 20%.

  • the roller bearing use grease lubricating.

  • 6 The nip adjusting type has manual type,.motor type and hydraulic type..

  • 7 This machine is equipped with two pieces of moving blade.

  • 8 Safety device: Pull the safety rod to achieve emergency stop.It can be installed with kick stop device and emergency stop device for safety.

  • 9 The electrical design theory conform to the TWO ROLL MILL specifications strictly.It is equipped with advanced elements introduced from home and abroad. The machine meet the requirements of machine control with easy operation.

  • 12 Frame, frame cap and base, looking very nice, are welded and treated by annealing for stress relieving.

Advantages & Features

  • 10 we can make tailored machine, suitable for the customer use.

  • 11 There are many speeds and speed ratios available, which can satisfy most customers’ formula and processing requirements.

    bottom of page